Fuel Level Sensor

Fitted the fuel level sensor by cutting a 40mm hole in the tank and then using M5 Rivnuts and stainless steel bolts for fixing. Also fitted a -6 fuel return next to the existing vent connections at the top of the tank.

To enable me to set up the Race Technology Dash 2 accurately for fuel level, I wired a multi meter reading resistance to the level sensor and then read the reading as I added a litre of water at a time. When empty the resistance was high and then reduced as the tank filled. Will use the readings to configure the Dash 2 later. Tank held 36 litres from empty.