After a little head scratching, I loosened the manifold bolts and adjusted the positioning to be further away from the body and then created more space for the silencer. Will fit bracket to support after I have fitted the rear arches.
Tuesday, 16 April 2013
Exhaust Fitting #1
Bolted the exhaust manifold in to place using hex bolts on the top side where I could gain access and for below used high tensile hex bolts. Fitted new Suzuki exhaust gaskets and bolted in to position. Aligned the joining pipe and the silencer and found that it would not fit.
After a little head scratching, I loosened the manifold bolts and adjusted the positioning to be further away from the body and then created more space for the silencer. Will fit bracket to support after I have fitted the rear arches.
After a little head scratching, I loosened the manifold bolts and adjusted the positioning to be further away from the body and then created more space for the silencer. Will fit bracket to support after I have fitted the rear arches.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment