Next I fitted the clutch centre and a new centre nut. I then used a punch to bend the lip over to lock in to place. Added the clutch plates with the thick plates on the inside and outside, the steels with the curved edge facing inwards.
Saturday, 18 October 2014
Turbo Rebuild #6 - Billet Clutch Basket Install
Installed the clutch basket, fitted the Extreme Engines aluminium clutch spacer plate that sits behind the clutch centre. The spacer is designed to remove the ramp system and give a more positive feel to the clutch.
Next I fitted the clutch centre and a new centre nut. I then used a punch to bend the lip over to lock in to place. Added the clutch plates with the thick plates on the inside and outside, the steels with the curved edge facing inwards.
Next I fitted the clutch centre and a new centre nut. I then used a punch to bend the lip over to lock in to place. Added the clutch plates with the thick plates on the inside and outside, the steels with the curved edge facing inwards.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment