Contacted Marc Nordon for the geometry settings for my car. He recommended the following:
Toe 1mm in on each corner
80mm front ride height measured on side panel lower edge where nosecone touches.
130mm rear ride height measured on side panel lower edge where rear wheel arch meets tub at front.
The ride heights will take a while to settle from new
damper wise :- road 3 clicks front and rear 6 clicks
track 6 clicks front and rear 10 clicks
this is a good starting point
I checked the settings on my car and they were slightly high. Decided to let the car settle for a while and will check again after a few more miles.
Set the dampers for the road with 3 clicks front and 6 clicks rear.
No comments:
Post a Comment